|Name:||Hydraulic Sectional Valves||Model:||P80|
|Quality:||Good Quality||Warranty:||One Year|
|Original:||Made In China||Application:||Water Drilling|
P80 5 spool hydraulic control valve,
Solenoid 5 spool hydraulic control valve,
Solenoid monoblock control valve
P80 Series Hydraulic Direction Valve 5 Spool Control Valve Sectional Valves Monoblock Structure With Solenoid
This is a brand new, made in China, HANJIU brand high quality 80Lpm monoblock valve. Matching Badestnost/Walvoil/Youli/Galtech......it is designed for any application where you need to control 1 individual function or cylinder. It has a 'power beyond' port 'C', which gives the valve the abilty to supply another valve downstream pressure. You must select 'power beyond sleeve ' for this function to work. Please note, you MUST still use a tank return hose from BOTH valves. Standard this comes with a 'cylinder' spool. This will 'lock' your load/cylinder in place when in centre position. If using this to spin a motor, a motor spool is recommended. If your motor is spinning fast, the centrifugal force if shut of dead by a cylinder spool, may cause damage to various components of your system. A motor spool will allow the motor to spin to a slow stop. It will not lock in place. Lever action is Spring Return to Center.
P80 series Monoblock Structure With Solenoid
The valve body is integral gray cast iron.
Spring end caps, mechanical positioning end caps, are die-cast aluminum.
Parallel circuit with load check valve on the oil inlet.
Can provide manual, pneumatic control, electro-hydraulic control.
An external power interface can be provided.
Can provide mechanical positioning.
Provides various spool functions: spools for controlling double-acting cylinders, single-acting cylinders, and oil motors.
The valve has small operating force and good flow characteristics.
The multi-way valve can be combined into an integral valve with 1 to 6 spools
|Viscosity||12 ...800 mm2/s|
|Filtration||10 to NAS 1638|
|Max operating pressure||250bar|
|Back pressure||50 bar|
|Nominal flow||80 l/min|
|Leakage(A,B-T)||15cm3/min at 120bar|
|Spool stroke||6 mm|
|Actuating force||< 200 N|
|Modification/ Spools||with 1 to 7|
|BSP Thread||Metric thread||US standard UNF thread||US standard NTP thread|
|code||Thread size||code||Thread size||code||Thread size||code||Thread size|
Contact Person: admin